MdigHalt()函数

Synopsis

Halt a continuous grab from an input device.

Format

void MdigHalt(DigId)

MIL_ID DigId; Digitizer identifier

Description

This function stops the specified digitizer from grabbing data. It should be used when performing a continuous grab with MdigGrabContinuous.

The DigId parameter specifies the identifier of the digitizer.

See also

MdigGrabContinuous

相关文章:

  1. MdigAlloc()函数
    Synopsis Allocate a digitizer. Format MIL_ID MdigAlloc(SystemId, DigNum, DataFormat, InitFlag, DigIdPtr)...
  2. MdigChannel()函数
    Synopsis Select the active input channel of a digitizer. Format void MdigChannel(DigId, Channel)...
  3. MdigControl()函数
    Synopsis Control the specified digitizer. Format void MdigControl(DigId, ControlType, Value)...
  4. MdigFree()函数
    Synopsis Free a digitizer. Format void MdigFree(DigId)...
  5. MdigGrab()函数
    Synopsis Grab data from an input device into a buffer. Format void MdigGrab(DigId, DestImageBufId)...
  6. MdigGrabContinuous()函数
    Synopsis Grab data continuously from an input device. Format void MdigGrabContinuous(DigId, DestImageBufId)...
  7. MdigGrabWait()函数
    Synopsis Wait for the end of the grab in progress. Format void MdigGrabWait(DigId, Flag)...
  8. MdigInquire()函数
    Synopsis Inquire about a digitizer. Format long MdigInquire(DigId, ParamToInquire, UserVarPtr)...
  9. MdigLut()函数
    Synopsis Copy a LUT buffer to a digitizer. Format void MdigLut(DigId, LutBufId)...
  10. MdigReference()函数
    Synopsis Select digitization reference level. Format void MdigReference(DigId, ReferenceType, ReferenceLevel)...

《MdigHalt()函数》上有1条评论

  1. Pingback： MdigGrabContinuous()函数 – 梁笔记

评论已关闭。