MdigLut()函数

Synopsis

Copy a LUT buffer to a digitizer.

Format

void MdigLut(DigId, LutBufId)

MIL_ID DigId; Digitizer identifier
MIL_ID LutBufId; LUT buffer identifier

Description

This function copies a LUT buffer to the specified digitizer LUT. MIL uses the data format of the digitizer to determine whether a LUT is supported. If it is not, an error is generated.

The DigId parameter specifies the identifier of the digitizer.

The LutBufId parameter specifies the identifier of a previously allocated LUT buffer (with an M_LUT attribute). The LUT buffer pixel depth and number of entries must match those of the digitizer, and the LUT buffer must either have a single color band or match the number of color bands of the digitizer. If the LUT buffer has a single color band, its data is loaded into the LUTs of each of the digitizer’s color bands. You can set this parameter to M_DEFAULT to associate the default pass-through LUT (or transparent LUT) with the digitizer.

See also

MdigAlloc, MbufAlloc1d

相关文章:

  1. MdigAlloc()函数
    Synopsis Allocate a digitizer. Format MIL_ID MdigAlloc(SystemId, DigNum, DataFormat, InitFlag, DigIdPtr)...
  2. MdigChannel()函数
    Synopsis Select the active input channel of a digitizer. Format void MdigChannel(DigId, Channel)...
  3. MdigControl()函数
    Synopsis Control the specified digitizer. Format void MdigControl(DigId, ControlType, Value)...
  4. MdigGrab()函数
    Synopsis Grab data from an input device into a buffer. Format void MdigGrab(DigId, DestImageBufId)...
  5. MdigGrabContinuous()函数
    Synopsis Grab data continuously from an input device. Format void MdigGrabContinuous(DigId, DestImageBufId)...
  6. MdigGrabWait()函数
    Synopsis Wait for the end of the grab in progress. Format void MdigGrabWait(DigId, Flag)...
  7. MdigHalt()函数
    Synopsis Halt a continuous grab from an input device. Format void MdigHalt(DigId)...
  8. MdigHookFunction()函数
    Synopsis Hook a function to a digitizer event. Format MDIGHOOKFCTPTR MdigHookFunction(DigId, HookType, HookHandlerPtr, UserDataPtr)...
  9. MdigInquire()函数
    Synopsis Inquire about a digitizer. Format long MdigInquire(DigId, ParamToInquire, UserVarPtr)...
  10. MdigReference()函数
    Synopsis Select digitization reference level. Format void MdigReference(DigId, ReferenceType, ReferenceLevel)...

《MdigLut()函数》上有28条评论

评论已关闭。